Series of NuMicro Family ultra-low power 32-bit microcontrollers based on the ARM Cortex-M0 core, equipped with LCD controller and rich peripherals.
All ICs are RoHS compliant.
* Status: P - mass production, S - samples, UD - under development, N - not recommended for new design.
| Chip |
Description |
Application Flash | SRAM | Data Flash | Loader Flash | Programm.
methods | Clock
frequency | Supply
voltage
[V] | Operating
temp.
[°C] | Package | Status * |
NANO110KC2BN (2507 KB) - operating frequency up to 42 MHz
- programmable system clock source
- 2 external crystal oscillators and 2 internal RC oscillators
- PLL controller (the source of system clock up to 120 MHz) sourced from 2 high speed oscillators: crystal or RC
- low power consumption in operating mode: 200 µA/MHz
- 8-channel PDMA
- up to 86 I/Os
- 4 x 32-bit timers
- Watchdog
- RTC
- 32 interrupts
- interfaces: 5 x UART supporting IrDA (SIR) and LIN functions, 3 x SPI, 2 x I2C, I2S, 3 x SC (Smart Card), EBI (External Bus Interface)
- LCD controller 4x40, 6x38
- 8-channel 16-bit PWM
- 12-channel 12-bit ADC
- 2-channel 12-bit DAC
- temperature sensor with 1 °C resolution
- LDO regulator
- 3-level BOD
| 32 KB | 8 KB | configurable
(shared with APROM) | 4 KB | ISP
ICP
IAP | Ext. crystal:
4 - 24 MHz
32.768 kHz
Int. RC:
12 MHz
10 kHz | 1.8 – 3.6 | -40 – +85 | LQFP-128
(14x14-mm) | P | |
NANO110KD2BN (2507 KB) | 64 KB | 8 KB | configurable
(shared with APROM) | 4 KB | ISP
ICP
IAP | Ext. crystal:
4 - 24 MHz
32.768 kHz
Int. RC:
12 MHz
10 kHz | 1.8 – 3.6 | -40 – +85 | LQFP-128
(14x14-mm) | P | |
NANO110KD3BN (2507 KB) | 64 KB | 16 KB | configurable
(shared with APROM) | 4 KB | ISP
ICP
IAP | Ext. crystal:
4 - 24 MHz
32.768 kHz
Int. RC:
12 MHz
10 kHz | 1.8 – 3.6 | -40 – +85 | LQFP-128
(14x14-mm) | P | |
NANO110KE3BN (2507 KB) | 128 KB | 16 KB | configurable
(shared with APROM) | 4 KB | ISP
ICP
IAP | Ext. crystal:
4 - 24 MHz
32.768 kHz
Int. RC:
12 MHz
10 kHz | 1.8 – 3.6 | -40 – +85 | LQFP-128
(14x14-mm) | P | |
NANO110RC2BN (2507 KB) - operating frequency up to 42 MHz
- programmable system clock source
- 2 external crystal oscillators and 2 internal RC oscillators
- PLL controller (the source of system clock up to 120 MHz) sourced from 2 high speed oscillators: crystal or RC
- low power consumption in operating mode: 200 µA/MHz
- 8-channel PDMA
- up to 51 I/Os
- 4 x 32-bit timers
- Watchdog
- RTC
- 32 interrupts
- interfaces: 5 x UART supporting IrDA (SIR) and LIN functions, 3 x SPI, 2 x I2C, I2S, 3 x SC (Smart Card)
- LCD controller 4x31, 6x29
- 7-channel 16-bit PWM
- 7-channel 12-bit ADC
- 2-channel 12-bit DAC
- temperature sensor with 1 °C resolution
- LDO regulator
- 3-level BOD
| 32 KB | 8 KB | configurable
(shared with APROM) | 4 KB | ISP
ICP
IAP | Ext. crystal:
4 - 24 MHz
32.768 kHz
Int. RC:
12 MHz
10 kHz | 1.8 – 3.6 | -40 – +85 | LQFP-64
(10x10-mm) | P | |
NANO110RD2BN (2507 KB) | 64 KB | 8 KB | configurable
(shared with APROM) | 4 KB | ISP
ICP
IAP | Ext. crystal:
4 - 24 MHz
32.768 kHz
Int. RC:
12 MHz
10 kHz | 1.8 – 3.6 | -40 – +85 | LQFP-64
(10x10-mm) | P | |
NANO110RD3BN (2507 KB) | 64 KB | 16 KB | configurable
(shared with APROM) | 4 KB | ISP
ICP
IAP | Ext. crystal:
4 - 24 MHz
32.768 kHz
Int. RC:
12 MHz
10 kHz | 1.8 – 3.6 | -40 – +85 | LQFP-64
(10x10-mm) | P | |
NANO110RE3BN (2507 KB) | 128 KB | 16 KB | configurable
(shared with APROM) | 4 KB | ISP
ICP
IAP | Ext. crystal:
4 - 24 MHz
32.768 kHz
Int. RC:
12 MHz
10 kHz | 1.8 – 3.6 | -40 – +85 | LQFP-64
(10x10-mm) | P | |
NANO110SC2BN (2507 KB) - operating frequency up to 42 MHz
- programmable system clock source
- 2 external crystal oscillators and 2 internal RC oscillators
- PLL controller (the source of system clock up to 120 MHz) sourced from 2 high speed oscillators: crystal or RC
- low power consumption in operating mode: 200 µA/MHz
- 8-channel PDMA
- up to 51 I/Os
- 4 x 32-bit timers
- Watchdog
- RTC
- 32 interrupts
- interfaces: 5 x UART supporting IrDA (SIR) and LIN functions, 3 x SPI, 2 x I2C, I2S, 3 x SC (Smart Card)
- LCD controller 4x31, 6x29
- 7-channel 16-bit PWM
- 7-channel 12-bit ADC
- 2-channel 12-bit DAC
- temperature sensor with 1 °C resolution
- LDO regulator
- 3-level BOD
| 32 KB | 8 KB | configurable
(shared with APROM) | 4 KB | ISP
ICP
IAP | Ext. crystal:
4 - 24 MHz
32.768 kHz
Int. RC:
12 MHz
10 kHz | 1.8 – 3.6 | -40 – +85 | LQFP-64
(7x7-mm) | P | |
NANO110SD2BN (2507 KB) | 64 KB | 8 KB | configurable
(shared with APROM) | 4 KB | ISP
ICP
IAP | Ext. crystal:
4 - 24 MHz
32.768 kHz
Int. RC:
12 MHz
10 kHz | 1.8 – 3.6 | -40 – +85 | LQFP-64
(7x7-mm) | P | |
NANO110SD3BN (2507 KB) | 64 KB | 16 KB | configurable
(shared with APROM) | 4 KB | ISP
ICP
IAP | Ext. crystal:
4 - 24 MHz
32.768 kHz
Int. RC:
12 MHz
10 kHz | 1.8 – 3.6 | -40 – +85 | LQFP-64
(7x7-mm) | P | |
NANO110SE3BN (2507 KB) | 128 KB | 16 KB | configurable
(shared with APROM) | 4 KB | ISP
ICP
IAP | Ext. crystal:
4 - 24 MHz
32.768 kHz
Int. RC:
12 MHz
10 kHz | 1.8 – 3.6 | -40 – +85 | LQFP-64
(7x7-mm) | P | |
NANO112LB1AN (3301 KB) - operating frequency up to 32 MHz
- programmable system clock source
- 2 external crystal oscillators and 2 internal RC oscillators
- PLL controller (the source of system clock up to 32 MHz) sourced from 2 high speed oscillators: crystal or RC
- ultra-low power consumption in operating mode: 150 µA/MHz
- 4-channel PDMA
- up to 40 I/Os
- 4 x 32-bit timers
- Watchdog
- RTC
- 32 interrupts
- interfaces: 4 x UART supporting IrDA (SIR) and LIN functions, 2 x SPI, 2 x I2C, 2 x SC (Smart Card)
- 4-channel 16-bit PWM
- 7-channel 12-bit ADC
- 2 analog comparators
- LCD driver 4x32 or 6x30
- temperature sensor with 1 °C resolution
- LDO regulator
- 3-level BOD
| 16 KB | 4 KB | configurable
(shared with APROM) | 4 KB | ISP
ICP
IAP | Ext. crystal:
4 - 24 MHz
32.768 kHz
Int. RC:
12/16 MHz
10 kHz | 1.8 – 3.6 | -40 – +85 | LQFP-48
(7x7-mm) | P | |
NANO112LC2AN (3301 KB) | 32 KB | 8 KB | configurable
(shared with APROM) | 4 KB | ISP
ICP
IAP | Ext. crystal:
4 - 24 MHz
32.768 kHz
Int. RC:
12/16 MHz
10 kHz | 1.8 – 3.6 | -40 – +85 | LQFP-48
(7x7-mm) | P | |
NANO112RB1AN (3301 KB) - operating frequency up to 32 MHz
- programmable system clock source
- 2 external crystal oscillators and 2 internal RC oscillators
- PLL controller (the source of system clock up to 32 MHz) sourced from 2 high speed oscillators: crystal or RC
- ultra-low power consumption in operating mode: 150 µA/MHz
- 4-channel PDMA
- up to 58 I/Os
- 4 x 32-bit timers
- Watchdog
- RTC
- 32 interrupts
- interfaces: 3 x UART supporting IrDA (SIR) and LIN functions, 2 x SPI, 2 x I2C, 2 x SC (Smart Card)
- 4-channel 16-bit PWM
- 7-channel 12-bit ADC
- 2 analog comparators
- LCD driver 4x32 or 6x30
- temperature sensor with 1 °C resolution
- LDO regulator
- 3-level BOD
| 16 KB | 4 KB | configurable
(shared with APROM) | 4 KB | ISP
ICP
IAP | Ext. crystal:
4 - 24 MHz
32.768 kHz
Int. RC:
12/16 MHz
10 kHz | 1.8 – 3.6 | -40 – +85 | LQFP-64
(10x10-mm) | P | |
NANO112RC2AN (3301 KB) | 32 KB | 8 KB | configurable
(shared with APROM) | 4 KB | ISP
ICP
IAP | Ext. crystal:
4 - 24 MHz
32.768 kHz
Int. RC:
12/16 MHz
10 kHz | 1.8 – 3.6 | -40 – +85 | LQFP-64
(10x10-mm) | P | |
NANO112SB1AN (3301 KB) - operating frequency up to 32 MHz
- programmable system clock source
- 2 external crystal oscillators and 2 internal RC oscillators
- PLL controller (the source of system clock up to 32 MHz) sourced from 2 high speed oscillators: crystal or RC
- ultra-low power consumption in operating mode: 150 µA/MHz
- 4-channel PDMA
- up to 58 I/Os
- 4 x 32-bit timers
- Watchdog
- RTC
- 32 interrupts
- interfaces: 4 x UART supporting IrDA (SIR) and LIN functions, 2 x SPI, 2 x I2C, 2 x SC (Smart Card)
- 4-channel 16-bit PWM
- 7-channel 12-bit ADC
- 2 analog comparators
- LCD driver 4x32 or 6x30
- temperature sensor with 1 °C resolution
- LDO regulator
- 3-level BOD
| 16 KB | 4 KB | configurable
(shared with APROM) | 4 KB | ISP
ICP
IAP | Ext. crystal:
4 - 24 MHz
32.768 kHz
Int. RC:
12/16 MHz
10 kHz | 1.8 – 3.6 | -40 – +85 | LQFP-64
(7x7-mm) | P | |
NANO112SC2AN (3301 KB) | 32 KB | 8 KB | configurable
(shared with APROM) | 4 KB | ISP
ICP
IAP | Ext. crystal:
4 - 24 MHz
32.768 kHz
Int. RC:
12/16 MHz
10 kHz | 1.8 – 3.6 | -40 – +85 | LQFP-64
(7x7-mm) | P | |
NANO112VC2AN (3301 KB) - operating frequency up to 32 MHz
- programmable system clock source
- 2 external crystal oscillators and 2 internal RC oscillators
- PLL controller (the source of system clock up to 32 MHz) sourced from 2 high speed oscillators: crystal or RC
- ultra-low power consumption in operating mode: 150 µA/MHz
- 4-channel PDMA
- up to 80 I/Os
- 4 x 32-bit timers
- Watchdog
- RTC
- 32 interrupts
- interfaces: 4 x UART supporting IrDA (SIR) and LIN functions, 2 x SPI, 2 x I2C, 2 x SC (Smart Card)
- 4-channel 16-bit PWM
- 8-channel 12-bit ADC
- 2 analog comparators
- LCD driver 4x32 or 6x30
- temperature sensor with 1 °C resolution
- LDO regulator
- 3-level BOD
| 32 KB | 8 KB | configurable
(shared with APROM) | 4 KB | ISP
ICP
IAP | Ext. crystal:
4 - 24 MHz
32.768 kHz
Int. RC:
12/16 MHz
10 kHz | 1.8 – 3.6 | -40 – +85 | LQFP-100
(14x14-mm) | P | |
